This is a water based (so no nasties) that is easy to apply – you will love it!

Size: 500ml of this liquid Ecrylimer Sealer will cover approximately 1/2 a square metre of finished products.

Included is 50g of White.

Shake before use – wear gloves, avoid skin and eye contact.

Included are 50g of Black.

Shake before use – wear gloves, avoid skin and eye contact.

Included are 10g of Red, Blue, Yellow, Green, Black and White.

Shake before use – wear gloves, avoid skin and eye contact.

Included are 10g of Neon Red, Purple, Yellow and Pink.

Shake before use – wear gloves, avoid skin and eye contact.
Note: Can fade in the sunlight – Neons prefer mechanical mixing for dispersion.

Ecrylimer Eco Casting Compound Neon Edition Starter Kit includes 1 box with:

• 250g Liquid and 625g of Base Powder (1:2.5 ratio) – Total 875g
• 1 x coaster mold (may not be same as in picture)
• 1 x Oval Tray Mould
• 4 x 5mls of NEON pigments (you only need a drop or 2!)
• 2 x recyclable bio plastic cups
• 2 x Wooden Mixer sticks
• 2 x Pairs of Nitrile Gloves
• Complete and comprehesive instructions

All packed into a lovely pink box, nestled in tissue paper. This makes a lovely gift option!
Note – pigments and coaster shape may change from the photo pictured.

Ecrylimer Eco Casting Compound has a buttery smooth pour with virtually no bubbles for a super-smooth set on both sides with minimal sanding.
Working time – 5-10 mins.
Demould in 40-50 minutes or less. More working time to be creative.
Let cure for 48-72 hours to full strength.

Cleaning
Easy clean up of molds etc with soapy water or sugar soap wipes before it sets.

Ecrylimer Eco Casting Compound Starter Kit includes 1 box with:

• 250g Liquid and 625g of Base Powder (1:2.5 ratio) – Total 875g
• 1 x coaster mold (may not be same as in picture)
• 3 x 5mls of pigments (you only need a drop or 2!)
• 2 x recyclable bio plastic cups
• 2 x Wooden Mixer sticks
• 2 x Pairs of Nitrile Gloves
• Complete and comprehesive instructions

All packed into a lovely pink box, nestled in tissue paper. This makes a lovely gift option!
Note – pigments and coaster shape may change from the photo pictured.

Ecrylimer Eco Casting Compound has a buttery smooth pour with virtually no bubbles for a super-smooth set on both sides with minimal sanding.
Working time – 5-10 mins.
Demould in 40-50 minutes or less. More working time to be creative.
Let cure for 48-72 hours to full strength.

Cleaning
Easy clean up of molds etc with soapy water or sugar soap wipes before it sets.