Resin and more https://www.resinandmore.co.nz Thu, 13 Aug 2026 21:37:10 +0000 en-US hourly 1 https://wordpress.org/?v=7.1 https://www.resinandmore.co.nz/wp-content/uploads/2020/03/cropped-resinandmore-icon-512x512-1-32x32.png Resin and more https://www.resinandmore.co.nz 32 32 Jes Pigments – Water Based Colour https://www.resinandmore.co.nz/product/jes-pigments-water-based-colour/ Fri, 22 May 2026 00:33:39 +0000 https://www.resinandmore.co.nz/?post_type=product&p=11565
  • Water-based and easy to mix
  • Colour intensity fully adjustable
  • Suitable for AquaCast, Jesmonite, and other acrylic eco-resins
  • 55ml bottles
    • ]]>     High-Concentration Water-Based Pigment. These high-quality, water-based colour pigments are specially formulated for use with acrylic (eco-resin) powders such as AquaCast and Jesmonite. Highly concentrated, they deliver vibrant, consistent colour while allowing complete control over intensity—simply adjust the shade by adding more or fewer drops.

    The pigments blend smoothly into mixes without affecting curing or performance, making them ideal for achieving anything from soft, translucent tones to rich, bold colours. They can also be used with epoxy resin, offering excellent versatility across a wide range of creative applications.

    Available in an extensive range of colours, these pigments are perfect for artists, makers, and designers working on decorative objects, homewares, sculptures, and art pieces.

    Features:

    • High-concentration for strong, vibrant colour
    • Water-based and easy to mix
    • Colour intensity fully adjustable
    • Suitable for AquaCast, Jesmonite, and other acrylic eco-resins
    • Compatible with epoxy resin
    • Wide range of colours available
    • 55ml bottles
    ]]>         Coaster Mould Octo Set 8.5cm https://www.resinandmore.co.nz/product/coaster-mould-octo-set-8-5cm/ Sun, 14 Dec 2025 22:26:38 +0000 https://www.resinandmore.co.nz/?post_type=product&p=11498
  • Silicone Mould Set of 6
  • Octogon coaster
  • Semi-transparent colour
  • Approx. 8.5 cm
    • ]]>     An Octogon Coaster Mould Set of 6. This silicone mould will greate a simple round coaster. Ideal for epoxy resin, enhance with colours, glitter and shimmer powder. Also suitable for Acrylic Composites like Ecrylimer, Aqua Cast and Acrylic One.
    Pour coast as thick as you want. Ideal for embedding dried flowers.

    • Silicone Moulds for resin.
    • Approximate sizes are: interior 8.5cm (3.3″) – between horizontal sides
    • Volume: 115ml for one coaster (690 ml for all 6)
    • Height of mould inside approx. 19.5 mm.
    • NZ $1 coin shown for scale (not included).

    Sizes may vary slightly and should be used as an indication only.

    ]]>         Coaster Mould Square 10cm https://www.resinandmore.co.nz/product/coaster-mould-square-10cm/ Mon, 09 Jun 2025 02:35:47 +0000 https://www.resinandmore.co.nz/?post_type=product&p=11098
  • Silicone Mould
  • Square coaster
  • Semi-transparent colour
  • Approx. 10 cm diameter
    • ]]>     A Square Coaster Mould. This silicone mould will greate a simple round coaster. Ideal for epoxy resin, enhance with colours, glitter and shimmer powder. Also suitable for Acrylic Composites like Ecrylimer, Aqua Cast and Acrylic One.
    Having deeper sides than most coasters, one can easily include memorabilia, dried flowers, shells and more.

    • Silicone Moulds for resin.
    • Approximate sizes are: interior ~10cm (3.9″)
    • Volume: 190ml
    • Height of mould inside approx. 20 mm.
    • NZ $1 coin shown for scale (not included).

    Sizes may vary slightly and should be used as an indication only.

    ]]>         Round Half Grid Coaster Mould https://www.resinandmore.co.nz/product/round-half-grid-coaster-mould/ Sat, 07 Jun 2025 08:26:55 +0000 https://www.resinandmore.co.nz/?post_type=product&p=11086
  • Silicone
  • Semi-transparent colour
  • 9 cm diameter
    • ]]>     Create round coasters with a grid pattern. Ideal for epoxy resin, enhance with colours, glitter and shimmer powder.

    • Silicone Moulds for resin.
    • Approximate sizes are 8.8cm diameter (inside)
      Sizes as shown on image (inside measurements).
    • Height of mould is 7mm (inside approx. 5mm).
    • Volume approx. 40ml
    • NZ $1 coin shown for scale (not included).

    Sizes may vary slightly and should be used as an indication only.

    ]]>         Coaster Mould Round Set 10cm https://www.resinandmore.co.nz/product/coaster-mould-round-set-10cm/ Sat, 07 Jun 2025 08:07:05 +0000 https://www.resinandmore.co.nz/?post_type=product&p=11081
  • Silicone Mould Set of 6
  • Round coaster
  • Semi-transparent colour
  • Approx. 10 cm diameter
    • ]]>     A Round Coaster Mould Set of 6. This silicone mould will greate a simple round coaster. Ideal for epoxy resin, enhance with colours, glitter and shimmer powder. Also suitable for Acrylic Composites like Ecrylimer, Aqua Cast and Acrylic One.
    Pour coast as thick as you want. Ideal for embedding dried flowers.

    • Silicone Moulds for resin.
    • Approximate sizes are: interior 10cm (4″)
    • Volume: 140ml for one coaster (840 ml for all 6)
    • Height of mould inside approx. 18 mm.
    • NZ $1 coin shown for scale (not included).

    Sizes may vary slightly and should be used as an indication only.

    ]]>         Coaster Mould Round 13cm https://www.resinandmore.co.nz/product/coaster-mould-round-13cm/ Sat, 07 Jun 2025 03:28:02 +0000 https://www.resinandmore.co.nz/?post_type=product&p=11072
  • Silicone Mould
  • Round coaster
  • Semi-transparent colour
  • Approx. 13 cm diameter
    • ]]>     A Round Coaster Mould. This silicone mould will greate a simple round coaster. Ideal for epoxy resin, enhance with colours, glitter and shimmer powder. Also suitable for Acrylic Composites like Ecrylimer, Aqua Cast and Acrylic One.

    • Silicone Moulds for resin.
    • Approximate sizes are: interior 12.9cm (5″) , exterior 13.8 cm.
    • Volume: 120ml
    • Height of mould inside approx. 11 mm.
    • NZ $1 coin shown for scale (not included).

    Sizes may vary slightly and should be used as an indication only.

    ]]>         Bookmark Rectangular 10 https://www.resinandmore.co.nz/product/bookmark-rectangular-10/ Mon, 07 Apr 2025 22:48:14 +0000 https://www.resinandmore.co.nz/?post_type=product&p=10860
  • 3 pieces
  • Rectangular shape
  • Semi-transparent colour silicone
  • approx. 10 cm
    • ]]>     Rectangular silicone bookmark, 9. cm long. Smooth interior and ideal for epoxy resin, enhance with colours, glitter and shimmer powder.
    Limited New Stock slightly different dimensions to image:

    • Silicone Moulds for resin (3 pieces).
    • Approximate sizes are: Inner 9.9 cm (outer 10.4 cm) – Volume 10 ml each
      Inner width 2.5 cm
      Individual sizes as shown on image (inside measurements).
    • Wall thickness is 2 mm
    • Height of mould is 4.5 mm (inside approx. 3 mm).
    • NZ $1 coin shown for scale (not included).

    Sizes may vary slightly and should be used as an indication only.

    When only casting less than 3mm with MastCast121 and especially TotalCast, the bookmarks may be bendable and not be as rigid as a hard plastic ruler. The do get harder over time.

    ]]>         Bookmark Tassels 25 https://www.resinandmore.co.nz/product/bookmark-tassels/ Sun, 10 Nov 2024 23:48:05 +0000 https://www.resinandmore.co.nz/?post_type=product&p=8814
  • 25 bookmark tassels
  • Random colours
    • ]]>
  • Colourful Tassels for bookmarks.
  • 25 Tassels – random colours!
  • Usually a blue in each packet and a range of other colours.
  • Images only show examples of colours and not exact choice.
  • NZ $1 coin shown for scale (not included).

    •  

    ]]>         Turtles Silver – Metal https://www.resinandmore.co.nz/product/turtles-silver-metal/ Sun, 03 Sep 2023 02:27:45 +0000 https://www.resinandmore.co.nz/?post_type=product&p=7296
  • 20 Silver Turtles
  • Embed in resin as decoration.
    • ]]>     A set of Silver coloured Metal Turtles to add as decorations to your resin art, e.g. embed these small turtles in a beach scene on a cheeseboard, art piece or include in the handles of cheese knives when using the cheese knife handle mould.

    • 20 Silver Turtles.
    • Size: length 10 mm, width 10 mm, height 3.6 mm (half the size of coloured turtles).
    • Bottom of turtle is flat.
    • NOTE: there is a small hole through the centre as these can be used for making bangles.
      The resin flows into the hole, making it more secure.
      NZ $1 coin shown for scale (not included).

    Sizes and volumes may vary slightly and should be used as an indication only.

    ]]>         Turtles White https://www.resinandmore.co.nz/product/turtles-white/ Fri, 01 Sep 2023 09:18:54 +0000 https://www.resinandmore.co.nz/?post_type=product&p=7289
  • 15 White Turtles
  • Embed in resin as decoration.
    • ]]>     A set of White Turtles to add as decorations to your resin art, e.g. embed these small turtles in a beach scene on a cheeseboard, art piece or include in the handles of cheese knives when using the cheese knife handle mould.

    • 15 White Turtles (=cream coloured)
    • Size: length 18 mm, width 14.5 mm, height 7 mm
    • NOTE: there is a small hole through the centre as these can be used for making bangles.
      The resin flows into the hole, making it more secure.
      Or one can sand it thinner on a bench sander (insert a wire or toothpicks through the hole to hold).
    • NZ $1 coin shown for scale (not included).

    Sizes and volumes may vary slightly and should be used as an indication only.

    ]]>