Resin and more https://www.resinandmore.co.nz Mon, 13 Oct 2025 06:56:54 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://www.resinandmore.co.nz/wp-content/uploads/2020/03/cropped-resinandmore-icon-512x512-1-32x32.png Resin and more https://www.resinandmore.co.nz 32 32 Christmas Snowflake Mould 3 Set https://www.resinandmore.co.nz/product/christmas-snowflake-mould-3-set/ Sun, 10 Nov 2024 23:33:12 +0000 https://www.resinandmore.co.nz/?post_type=product&p=8811
  • Soft Silicone Mould
  • Christmas Snowflake Mould - 3 snowflakes
  • Semi-transparent colour
  • Approx. 8 cm
    • ]]>     Snowflake mould to hang on your Christmas Tree. Ideal for epoxy resin, enhance with colours, glitter and shimmer powder.

    • Soft Silicone Moulds for resin
    • Approximate sizes are: Exterior max 8 cm (3.1″) at widest point.
    • Thickness of walls 1mm
    • Height of mould 6.5 mm
    • Depth 6 mm
    • NZ $1 coin shown for scale (not included).

    Sizes may vary slightly and should be used as an indication only.

    ]]>         Christmas Hanging Ball Decor https://www.resinandmore.co.nz/product/christmas-hanging-ball-decor/ Wed, 28 Sep 2022 03:42:47 +0000 https://www.resinandmore.co.nz/?post_type=product&p=5731
  • Silicone Mould x 2
  • 3 Openings under main top opening
  • Christmas Decor Mould
  • Blue colour
  • Approx. 6.8 cm
    • ]]>     Round Bell mould to hang on your Christmas Tree (x2). Ideal for epoxy resin, enhance with colours, glitter and shimmer powder or use for Acrylic Composite casting, e.g. A1 Acrylic, Ecrylimer or AquaCast. Or embed your family photos or special images.

    • Silicone Moulds for resin / acrylic composites
    • Approximate sizes are: Exterior max 6.8 cm (2.7″) diameter.
      Sizes as shown on image.
    • Volume:  20 ml
    • Thickness of walls 3 mm
    • Height of mould 7 mm
    • Depth 5 mm
    • NZ $1 coin shown for scale (not included).

    Sizes may vary slightly and should be used as an indication only.

    ]]>         Christmas Snowflake Mould https://www.resinandmore.co.nz/product/christmas-snowflake-mould/ Wed, 28 Sep 2022 01:37:23 +0000 https://www.resinandmore.co.nz/?post_type=product&p=5726
  • Soft Silicone Mould x 2
  • Christmas Snowflake Mould
  • Semi-transparent colour
  • Approx. 7.7 cm
    • ]]>     Snowflake mould to hang on your Christmas Tree (x2). Ideal for epoxy resin, enhance with colours, glitter and shimmer powder or use for Acrylic Composite casting, e.g. A1 Acrylic, Ecrylimer or AquaCast.

    • Soft Silicone Moulds for resin / acrylic composites
    • Approximate sizes are: Exterior max 7.7 cm (3″) at widest point.
      Sizes as shown on image.
    • Volume:  16 ml
    • Thickness of walls 1.5 mm
    • Height of mould 11.5 mm
    • Depth 9 mm
    • NZ $1 coin shown for scale (not included).

    Sizes may vary slightly and should be used as an indication only.

    ]]>         Christmas Tree Mould – wide https://www.resinandmore.co.nz/product/christmas-tree-mould-wide/ Wed, 28 Sep 2022 01:07:31 +0000 https://www.resinandmore.co.nz/?post_type=product&p=5721
  • Soft Silicone Mould
  • Christmas Tree with Wide base
  • Semi-transparent colour
  • Approx. 13 cm x 12 cm
    • ]]>     Christmas Tree Mould forming a tree with a broader / wide base. This silicone mould will great a lovely Christmas tree. Ideal for epoxy resin, enhance with colours, glitter and shimmer powder or use for Acrylic Composite casting, e.g. A1 Acrylic, Ecrylimer or AquaCast.

    • Soft Silicone Moulds for resin / acrylic composites
    • Approximate sizes are: Exterior max 13cm (5.8″) , base width 12 cm (4.7″)
      Sizes as shown on image.
    • Volume:  280 ml
    • Recommend supporting the sides with a round piece of cardboard as it could be top heavy.
    • Height of finished product approximately 7.8 cm x 7.7 cm at the base.
    • If you add a “plug” (e.g. toilet roll / small plastic bottle wrapped in clingwrap) in the base, one can create a hollow for fairy lights.
    • NZ $1 coin shown for scale (not included).

    Sizes may vary slightly and should be used as an indication only.

    ]]>         Christmas Tree Mould – narrow https://www.resinandmore.co.nz/product/christmas-tree-mould-narrow/ Tue, 27 Sep 2022 09:03:19 +0000 https://www.resinandmore.co.nz/?post_type=product&p=5709
  • Soft Silicone Mould
  • Narrow Christmas Tree
  • Semi-transparent colour
  • Approx. 16 cm x 9 cm
    • ]]>     Christmas Tree Mould forming a narrow tree. This silicone mould will great a lovely Christmas tree. Ideal for epoxy resin, enhance with colours, glitter and shimmer powder or use for Acrylic Composite casting, e.g. A1 Acrylic, Ecrylimer or AquaCast.

    • Soft Silicone Moulds for resin / acrylic composites
    • Approximate sizes are: Exterior max 15.7cm (6.2″) , base width 9.3cm (3.6″)
      Sizes as shown on image.
    • Volume:  240 ml
    • Recommend supporting the sides with a round piece of cardboard as it could be top heavy.
    • Height of finished product approximately 14.7 cm x 8.8 cm at the base.
    • If you add a “plug” (e.g. toilet roll / small plastic bottle wrapped in clingwrap) in the base, one can create a hollow for fairy lights.
    • NZ $1 coin shown for scale (not included).

    Sizes may vary slightly and should be used as an indication only.

    ]]>