Resin and more

You are here: Home / Acrylic Resin (Water-based ) / A1 Base Super White Kit
Sale!
A1 Acrylic One Composite Base
A1 Acrylic One Composite Base

A1 Base Super White Kit

Original price was: $395.00.Current price is: $335.75. incl GST

  • A1 Super White will give you a whiter casting
  • Eliminates the need for white pigment.
  • A1 Super White Base material is a two-component material
  • Water-based acrylic resin
  • Mixing Ration 2:1 (powder:liquid)
  • White in colour
Original price was: $395.00.Current price is: $335.75. incl GST

In stock

Join Waitlist We will inform you when the product arrives in stock. Please leave your valid email address below. (* required)
SKU: N/A
ACS

Product Description

If the A1 object needs to be extra white, A1 Super White is the product for you.
A1 Super White is similar to the standard A1 product, but is supplied with an extra white A1 Powder that creates a whiter end result.

  • Mixing ratio: 1 part A1 Super White Liquid to 2 parts A1 Super White Powder
  • Eliminates the need for white pigment.
  • Water-based acrylic resin – clean up with water
  • Non-Toxic

The colour difference between A1 Super White and A1 Base Material is shown below.

Acrylic One Super White versus Standard Base A1

We supply the following sets:

  • 15 kg ( 5 kg A1 SW Liquid, 10 kg A1 SW Powder)

Please note that packaging may differ at time of delivery.

  • Weigh the A1 Extra White Resin liquid and the A1 Extra White in separate cups.
  • Mixing ratio: 1 part A1 Liquid to 2 parts A1 Powder
  • Start swirling the liquid. Add the powder into the resin liquid slowly while stirring. Make your Powder additions small to start, until you gain experience.
  • Depending on the weather conditions, you may experience slight clots, so we recommend straining thru a small tea strainer when pouring, which is available from your local supermarket.
  • A mixing stirrer (e.g. on a drill) will assist in obtaining good results if used at a low speed.
  • Mixing stirrer 30 – 60 seconds. By hand 2-3 minutes. Until smooth like thick cream.
  • Make sure that the material on the bottom and sides of the cup or bucket are mixed in properly too.
  • There may be an increase in aeration, so prior to pouring, a light tap of the cup. This will assist to release those air bubbles before the pour.
  • A1 White was developed to attain high quality white castings without the need for white pigments, so if your intention is to create castings with colour, we strongly recommend using the regular A1 and our concentrated A1 pigments.
  • If you have any questions or experience difficulties, we are here to assist you, info@resinandmore.co.nz

Related products

Join Waitlist We will inform you when the product arrives in stock. Please leave your valid email address below. (* required)