Resin and more

You are here: Home / Acrylic Resin (Water-based ) / A2 Stone Bluecreet Kit
Sale!
A2 Stone Bluecreet Kit
A2 Stone Bluecreet Kit

A2 Stone Bluecreet Kit

Original price was: $57.50.Current price is: $48.88. incl GST

  • A2 Stone Bluecreet textured stone like finish
  • A2 Stone Bluecreet material is a two-component material
  • Water-based acrylic resin
  • Mixing Ration 5:1 (powder:liquid)
SKU: A2-1.2
ACS

Product Description

A2 Stone, is a Two Part Modified Acrylic Cementous Water Based Resin System, which sets hard within 20-30 minutes, and reaches full cure within 24 Hours. A2 Stone, Bluecreet is used to create a stone like feature, and does not need pigmenting. It has a sparkle in the light and looks exhilarating.

Characteristics:

  • Mixing ratio: 1 part A2 Liquid to 5 parts A2 Stone Bluecreet Powder
  • Easy to mix and pour ( no need to add water ).
  • Attractive textured surfaces
  • Lightweight laminations – tough – and good impact resistance.
  • Water-based acrylic resin – clean up with water.
  • Excellent fire – resistant properties.
  • Ideal for decorative purposes
  • No Need to add water.
  • Non-Toxic

We supply the following sets:

  • 1.2 kg ( 200g A2 Liquid, 1 kg A2 Powder) – Trial Pack
    More size in future.

Please note that packaging may differ at time of delivery.

  • Weigh the A1 Extra White Resin liquid and the A1 Extra White in separate cups.
  • Mixing ratio: 1 part A1 Liquid to 2 parts A1 Powder
  • Start swirling the liquid. Add the powder into the resin liquid slowly while stirring. Make your Powder additions small to start, until you gain experience.
  • Depending on the weather conditions, you may experience slight clots, so we recommend straining thru a small tea strainer when pouring, which is available from your local supermarket.
  • A mixing stirrer (e.g. on a drill) will assist in obtaining good results if used at a low speed.
  • Mixing stirrer 30 – 60 seconds. By hand 2-3 minutes. Until smooth like thick cream.
  • Make sure that the material on the bottom and sides of the cup or bucket are mixed in properly too.
  • There may be an increase in aeration, so prior to pouring, a light tap of the cup. This will assist to release those air bubbles before the pour.
  • A1 White was developed to attain high quality white castings without the need for white pigments, so if your intention is to create castings with colour, we strongly recommend using the regular A1 and our concentrated A1 pigments.
  • If you have any questions or experience difficulties, we are here to assist you, info@resinandmore.co.nz

Related products

Join Waitlist We will inform you when the product arrives in stock. Please leave your valid email address below. (* required)