Resin and more

Coaster Mould Octo Set 8.5cm

webbuilderram — Sun, 14 Dec 2025 22:26:38 +0000

An Octogon Coaster Mould Set of 6. This silicone mould will greate a simple round coaster. Ideal for epoxy resin, enhance with colours, glitter and shimmer powder. Also suitable for Acrylic Composites like Ecrylimer, Aqua Cast and Acrylic One.
Pour coast as thick as you want. Ideal for embedding dried flowers.

Silicone Moulds for resin.
Approximate sizes are: interior 8.5cm (3.3″) – between horizontal sides
Volume: 115ml for one coaster (690 ml for all 6)
Height of mould inside approx. 19.5 mm.
NZ $1 coin shown for scale (not included).

Sizes may vary slightly and should be used as an indication only.

Coaster Mould Square 10cm

webbuilderram — Mon, 09 Jun 2025 02:35:47 +0000

A Square Coaster Mould. This silicone mould will greate a simple round coaster. Ideal for epoxy resin, enhance with colours, glitter and shimmer powder. Also suitable for Acrylic Composites like Ecrylimer, Aqua Cast and Acrylic One.
Having deeper sides than most coasters, one can easily include memorabilia, dried flowers, shells and more.

Silicone Moulds for resin.
Approximate sizes are: interior ~10cm (3.9″)
Volume: 190ml
Height of mould inside approx. 20 mm.
NZ $1 coin shown for scale (not included).

Sizes may vary slightly and should be used as an indication only.

Round Half Grid Coaster Mould

webbuilderram — Sat, 07 Jun 2025 08:26:55 +0000

Create round coasters with a grid pattern. Ideal for epoxy resin, enhance with colours, glitter and shimmer powder.

Silicone Moulds for resin.
Approximate sizes are 8.8cm diameter (inside)
Sizes as shown on image (inside measurements).
Height of mould is 7mm (inside approx. 5mm).
Volume approx. 40ml
NZ $1 coin shown for scale (not included).

Sizes may vary slightly and should be used as an indication only.

Coaster Mould Round Set 10cm

webbuilderram — Sat, 07 Jun 2025 08:07:05 +0000

A Round Coaster Mould Set of 6. This silicone mould will greate a simple round coaster. Ideal for epoxy resin, enhance with colours, glitter and shimmer powder. Also suitable for Acrylic Composites like Ecrylimer, Aqua Cast and Acrylic One.
Pour coast as thick as you want. Ideal for embedding dried flowers.

Silicone Moulds for resin.
Approximate sizes are: interior 10cm (4″)
Volume: 140ml for one coaster (840 ml for all 6)
Height of mould inside approx. 18 mm.
NZ $1 coin shown for scale (not included).

Sizes may vary slightly and should be used as an indication only.

Coaster Mould Round Lizards

webbuilderram — Sat, 07 Jun 2025 07:57:08 +0000

A Round Coaster Mould with Lizard impresions. This silicone mould will greate a simple round coaster. Ideal for epoxy resin, enhance with colours, glitter and shimmer powder. Also suitable for Acrylic Composites like Ecrylimer, Aqua Cast and Acrylic One.

Silicone Moulds for resin.
Approximate sizes are: interior 11.1cm (4″)
Sizes as shown on image.
Volume: 100ml
Height of mould inside approx. 8 mm.
NZ $1 coin shown for scale (not included).

Sizes may vary slightly and should be used as an indication only.

Coaster Mould Round 13cm

webbuilderram — Sat, 07 Jun 2025 03:28:02 +0000

A Round Coaster Mould. This silicone mould will greate a simple round coaster. Ideal for epoxy resin, enhance with colours, glitter and shimmer powder. Also suitable for Acrylic Composites like Ecrylimer, Aqua Cast and Acrylic One.

Silicone Moulds for resin.
Approximate sizes are: interior 12.9cm (5″) , exterior 13.8 cm.
Volume: 120ml
Height of mould inside approx. 11 mm.
NZ $1 coin shown for scale (not included).

Sizes may vary slightly and should be used as an indication only.

Coaster Mould Lily Leaf

webbuilderram — Sat, 13 Aug 2022 23:30:25 +0000

Create Coasters with a Lotus lily leaf motif. This silicone mould will have a leaf impression that can be left or coloured with a pen. Ideal for epoxy resin, enhance with colours, glitter and shimmer powder. Also suitable for Acrylic Composites like Ecrylimer, Aqua Cast and Acrylic One.

Silicone Moulds for resin.
Approximate sizes are: interior 9.2 cm (3.6″), exterior 10 cm.
Sizes as shown on image.
Wall thickness is 1.5 mm.
Volume: 35 ml
Height of mould is 6.5 mm (inside approx. 5 mm).
NZ $1 coin shown for scale (not included).

Sizes may vary slightly and should be used as an indication only.

Coaster Mould Flower B

webbuilderram — Sat, 13 Aug 2022 00:06:28 +0000

Create Coasters with a flower motif. This silicone mould will have a flower impression that can be left or coloured with a pen. Ideal for epoxy resin, enhance with colours, glitter and shimmer powder. Also suitable for Acrylic Composites like Ecrylimer, Aqua Cast and Acrylic One. This coaster is very marginally larger than Coaster Mould Flower A and the inner motif lines are slightly different.

Silicone Moulds for resin.
Approximate sizes are: interior 11.2cm (4.4″) , exterior 12.8 cm.
Sizes as shown on image.
Wall thickness is 2 mm.
Volume: 75 ml
Height of mould is 9 mm (inside approx. 7.5 mm).
NZ $1 coin shown for scale (not included).

Sizes may vary slightly and should be used as an indication only. May not be exactly same as previously stocked.

Coaster Mould Flower A

webbuilderram — Fri, 12 Aug 2022 23:43:46 +0000

Create Coasters with a flower motif. This silicone mould will have a flower impression that can be left or coloured with a pen. Ideal for epoxy resin, enhance with colours, glitter and shimmer powder. Also suitable for Acrylic Composites like Ecrylimer, Aqua Cast and Acrylic One. This coaster is very marginally smaller than Coaster Mould Flower B and the inner motif lines are slightly different.

Silicone Moulds for resin.
Approximate sizes are: interior 10.7cm (4.2″), exterior 12 cm.
Sizes as shown on image.
Wall thickness is 2 mm.
Volume: 70 ml
Height of mould is 9 mm (inside approx. 7.5 mm).
NZ $1 coin shown for scale (not included).

Sizes may vary slightly and should be used as an indication only. May not be exactly same as previously stocked.

Coaster Small Rectangular + Holder

webbuilderram — Fri, 12 Aug 2022 06:37:01 +0000

Rectangular Coaster and Coaster Storage Box can be created with this silicone mould. Ideal for epoxy resin, enhance with colours, glitter and shimmer powder. Use heat-resistant UltraCast resin (temperatures of up to 90^oC) or TotalCast to fill these unique moulds.

Silicone Moulds for resin.
Approximate size of coaster: interior 10.3 cm x 5.6 cm (4″ x 2.2″). Small flange around edge to smooth edge. Small lip in finished cast.
One coaster and one holder / storage box.
Individual sizes as shown on image (outside measurements).
Holder mould size: 14.9 cm x 9 cm. (5.87 ” x 3.5″) – fits 4-5 coasters.
Depth of holder mould is 7.2 cm.
Volumes: Holder 165 ml and Coaster 50 ml.
Depth of coaster mould is 1 cm.
Finished coaster size: 11 cm x 6.4 cm x 1.2 cm (4.33″ x 2.52″ x 0.47″)
NZ $1 coin shown for scale (not included).

Sizes may vary slightly and should be used as an indication only.