Resin and more

Resin Calculator

Use Resin Calculator as a Guide

  • Add an extra amount if you wish to cover the sides of the board or canvas too.
  • Temperature and viscosity of the resin brand may also influence the thickness of the resin layer.
  • Need to convert a size to inches or mm? Scroll down for Conversion Calculator.
SQUARE / RECTANGLE
Resin Calculator (square/rectangle)
(Leave field empty or value greater than 0)
(Leave field empty or value greater than 0)
(Common thickness 1.0mm = 0.04in to 2.5mm = 0.1in)
(Common thickness 1.0mm = 0.04in to 2.5mm = 0.1in)
Approximate amount only. 1Total=Resin+Hardener
Approximate amount only. 1Total=Resin+Hardener
Approximate amount only. 1Total=Resin+Hardener
Calculate
CIRCULAR
Resin Calculator (circular) cm/in
(Common thickness 1.6mm = 0.06in to 2.5mm = 0.1in)
(Common thickness 1.6mm = 0.06in to 2.5mm = 0.1in)
(Common thickness 1.0mm = 0.04in to 2.5mm = 0.1in)
(Common thickness 1.0mm = 0.04in to 2.5mm = 0.1in)
Approximate amount only. 1Total=Resin+Hardener
Approximate amount only. 1Total=Resin+Hardener
Approximate amount only. 1Total=Resin+Hardener
Calculate
COMMON FRACTIONS
1/8′ = 0.125 1/4′ = 0.25 3/8 ‘= 0.375 1/2′ = 0.50
5/8′ = 0.625 3/4′ = 0.75 7/8′ = 0.875 1′ = 1.00
LENGTH CONVERSION CALCULATOR
Length Conversion Calculator
in
ft
yds
mm
cm
m

Disclaimer: The amount (volume) calculated to cover a surface by our calculator is for resin poured on a non-porous, flat surface, allowed to settle under gravity. Variations may occur across different surfaces e.g. canvas, MDF, aluminium, solid wood, etc. Addition of pigments or pastes, resin temperature (room temperature), heating resin pour and brand of resin may alter the viscosity and density of the mixed resin. Values shown are for the total amount required, resin and hardener mixed together and should be used as a guide only