Resin and more

You are here: Home / Acrylic Resin (Water-based ) / A1 Base Material Kit
Sale!
A1 Acrylic One Composite Base
A1 Acrylic One Composite Base

A1 Base Material Kit

Original price was: $245.00.Current price is: $180.00. incl GST

  • STOCK CLEARANCE SALE!
  • A1 Base material is a two-component material
  • Water-based acrylic resin
  • Mixing Ration 2:1 (powder:liquid)
  • White in colour
Original price was: $245.00.Current price is: $180.00. incl GST

In stock

Join Waitlist We will inform you when the product arrives in stock. Please leave your valid email address below. (* required)
SKU: N/A
ACS

Product Description

STOCK CLEARANCE SALE!
A1 Base material kit is a two-component material that consists of a mineral powder and a water-based acrylic resin.

These components bond to create a very strong material. A1 is environmentally friendly, safe to work with, fire resistant, easy to use and has a fast processing time.

  • Mixing ratio: 1 part A1 Liquid to 2 parts A1 Powder (by weight)
  • After mixing, the standard processing time is 20 – 25 minutes.
  • Non-toxic

We supply the following sets:

  • 7.5kg (2.5 kg A1 Liquid, 5kg A1 Powder)

Please note that packaging may differ at time of delivery.

  • Weigh the A1 Base resin liquid and the A1 Base Powder in separate cups.
  • Mixing ratio: 1 part A1 Liquid to 2 parts A1 Powder
  • Start swirling the liquid. Add the powder into the A1 Base resin liquid slowly while stirring. Make your Powder additions small to start, until you gain experience.
  • Depending on the weather conditions, you may experience slight clots, so we recommend straining thru a small tea strainer when pouring, which is available from your local supermarket.
  • A mixing stirrer (e.g. on a drill) will assist in obtaining good results if used at a low speed.
  • Mixing stirrer 30 – 60 seconds. By hand 2-3 minutes. Until smooth like thick cream.
  • After mixing, the standard processing time is 20 – 25 minutes
  • Make sure that the material on the bottom and sides of the cup or bucket are mixed in properly too.
  • There may be an increase in aeration, so prior to pouring, a light tap of the cup. This will assist to release those air bubbles before the pour.
  • A1 White was developed to attain high quality white castings without the need for white pigments, so if your intention is to create castings with colour, we strongly recommend using the regular A1 and our concentrated A1 pigments.
  • If you have any questions or experience difficulties, we are here to assist you, info@resinandmore.co.nz

Related products

Join Waitlist We will inform you when the product arrives in stock. Please leave your valid email address below. (* required)