Description
Reusable, non-stick silicone resin mixing beakers. Raised measurement scale increments with triangular shape, creating three pouring spouts. Ideal for mixing those small amounts for jewellery, keyring and letter casting.
- Raised measurement scale (on the outside) on a semi-transparent panel, making it very easy to read.
- 50 ml beaker : Height: 7.2cm, Capacity: 50ml
5 ml incements. - 100 ml beaker : Height: 9.4cm, Capacity: 100ml
10 ml incements. - Milliliter, Oz and cup measurements on the three panels.
- Squeeze to create pouring spout.
- Very flexible and easy to squeeze, thus easy to create thin pours.
- NZ $1 coin shown for scale (not included).
Usage tips:
- Always check beaker measurements for accuracy, by pouring in set volumes from an accurate jug (or you can even weigh water volumes).
- Hold beakers in a cupped hand when stiring resin or hold on a table, as they are flexible.
- Beakers can be rinsed with hot, soapy water.
- After resin pour, can spray with isopropyl alcohol and wiped clean, or
- Leave on side until resin has cured and then peel free. Check for any small resin flakes before next mix.
Physical size measurements may vary slightly depending where the length or width of the beaker is measured and should be used as a indication only.
